Aruba IAP-103 (RW) Instant 2x2:2 11n AP

Popis produktu:

Aruba IAP-103 (RW) Instant 2x2:2 11n AP

Features and Benefits

Advanced Cellular Coexistence (ACC)
Aruba's Advanced Cellular Coexistence (ACC) feature enables WLANs to perform at peak efficiency by minimizing interference from 3G/4G LTE networks, distributed antenna systems and commercial small cell/femtocell equipment.

WI-FI Client Optimization
To eliminate sticky client behavior while users roam, the Aruba 103 series APs feature Aruba's patented ClientMatch technology, which continuously gathers session performance metrics from mobile devices.
If a mobile device moves away from an AP or if RF interference impedes performance, ClientMatch automatically steers the device to a better AP.

Quality of Service for Lync
Aruba 103 series APs additionally support priority handling and policy enforcement for individual Microsoft Lync media on the same device, including encrypted videoconferencing, voice, chat and desktop sharing.

Choose your Operating Mode
Aruba 103 series APs offer a choice of operating modes to meet your unique management and deployment requirements

Controller-managed mode. When managed by Aruba Mobility Controllers, the AP-103 offers centralized configuration, data encryption, policy enforcement and network services, as well as distributed and centralized traffic forwarding. Please refer to the Aruba Mobility Controller data sheets for more details.
Aruba Instant mode. In Aruba Instant mode, a single IAP-103 automatically distributes the network configuration to other Instant APs in the WLAN. Simply power-up on Instant AP, configure it over the air, and plug in the other APs – the entire process takes about five minutes
For large installations across multiple sites, the Aruba Activate service significantly reduces deployment time by automating device provisioning, firmware upgrades, and inventory management. With Aruba Activate, Instant APs are factory- shipped to any site and configure themselves when powered up.

If WLAN and network requirements change, a built-in migration path allows Aruba Instant APs to become part of a WLAN that is centrally managed by a Mobility Controller.

Advanced Features

Spectrum analysis
- Capable of part-time or dedicated air monitoring, the spectrum analyzer remotely scans the 2.4-GHz and 5-GHz radio bands to identify sources of RF interference

Security
- Integrated wireless intrusion protection offers thread protection and mitigation, and eliminates the need for separate RF sensors and security appliances

- IP reputation and security services identify, classify, and block malicious files, URL and IPs, providing comprehensive protection against advanced online threats

- Integrated Trusted Platform Module (TPM) for secure storage of credentials and keys

- SecureJack-capable for secure tunneling of wired Ethernet traffic

Operating Modes

802.11a/b/g/n Aruba Instant AP
802.11a/b/g/n Mobility Controller-managed  AP
Air monitor (AM) for wireless IDS, rogue detection and containment
Spectrum analyzer
Secure enterprise mesh
Remote AP (RAP) when used with a Mobility Controller
Wireless Radio Specifications

AP type: Indoor, dual radio, 5-GHz and 2.4-GHz 802.11n 2x2:2
Software-configurable dual radio supports 5-GHz (Radio 0) and 2.4-GHz (Radio 1)
2x2 MIMO with two spatial streams and up to 300 Mbps wireless data rate
Supported frequency bands (country-specific restrictions apply):
- 2.4000 to 2.4835 GHz

- 5.150 to 5.250 GHz

- 5.250 to 5.350 GHz

- 5.470 to 5.725 GHz

- 5.725 to 5.850 GHz

Support for up to 255 associated client devices per radio, and up to 16 BSSIDs per radio
Available channels: Dependent on configured regulatory domain
Dynamic frequency selection (DFS) optimizes the use of available RF spectrum
Supported radio technologies:
- 802.11b: Direct-sequence spread-spectrum (DSSS)

- 802.11a/g/n: Orthogonal frequency-division multiplexing (OFDM)

Supported modulation types:
- 802.11b: BPSK, QPSK, CCK

- 802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM

Transmit power: Configurable in increments of 0.5 dBm
Maximum (aggregate, conducted total) transmit power (limited by local regulatory  requirements):
- 2.4-GHz band: +21 dBm (18 dBm per chain)

- 5-GHz band: +21 dBm (18 dBm per chain)

Advanced Cellular Coexistence (ACC) minimizes interference  from  cellular networks
Maximum ratio combining (MRC) for improved receiver performance
Cyclic delay/shift diversity (CDD/CSD) for improved downlink RF performance
Short guard interval for 20-MHz and 40-MHz channels
Space-time block coding (STBC) for increased range and improved  reception
Low-density parity check (LDPC) for high-efficiency error correction  and  increased throughput
Supported data rates (Mbps):
- 802.11b: 1, 2, 5.5, 11

- 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54

- 802.11n: 6.5 to 300 (MCS0 to MCS15)

802.11n high-throughput (HT) support: HT 20/40
802.11n packet aggregation: A-MPDU, A-MSDU
Power

Maximum power consumption: 9.5W (POE) or 8W (DC)
Power sources sold separately
Direct DC source: 12 Vdc nominal, +/- 5%
Power over Ethernet (PoE): 48 Vdc (nominal) 802.3af or 802.3at-compliant source
Antennas

Two integrated dual-band downtilt omni-directional antennas for 2x2 MIMO with maximum antenna gain of 4.0 dBi in 2.4 GHz and 4.5 dBi in 5 GHz. Built-in antennas are optimized for horizontal ceiling mounted orientation of the AP. The downtilt angle for maximum gain is approximately 30 degrees.
Other Interfaces

10/100/1000BASE-T Ethernet network interface (RJ-45)
- Auto-sensing link speed and MDI/MDX

- 802.3az Energy Efficient Ethernet (EEE)

- PoE-PD: 48 Vdc (nominal) 802.3af PoE or 802.3at PoE+

DC power interface, accepts 1.7/4.0-mm center-positive circular plug with 9.5-mm  length
Serial console interface (proprietary; optional adapter cable available)
Visual indicators (LEDs):
- Power/system status

- Ethernet link status (ENET)

- Radio status (two; RAD0, RAD1)

Kensington security slot
Reset button
Mounting

Included with AP:
- Mounting brackets (2) for attaching to 9/16-inch or 15/16-inch T-bar drop-tile ceiling

Spare mounting kit:
- AP-220-MNT-C1: Aruba AP mount kit contains two ceiling-grid rail adapters for flat rails

Optional mounting kits:
- AP-220-MNT-C2: Aruba AP mount kit contains two ceiling-grid rail adapters for Interlude and Silhouette style rails

- AP-220-MNT-W1: Aruba AP mount kit contains one basic flat-surface wall/ceiling mount  bracket

- AP-200-MNT-W2: Aruba AP mount kit contains one secure flat-surface wall/ceiling mount cradle

Mechanical

Dimensions/weight (unit, excluding mount accessories):
- 150 mm (W) x 150 mm (D) x 41.5 mm (H)

- 5.9"? (W) x 5.9"? (D) x 1.63"? (H)

- 300 g (0.66 lbs)

Dimensions/weight (shipping):
- 192 mm (W) x 178 mm (D) x 68 mm (H)

- 7.6"? (W) x 7.0"? (D) x 2.68"? (H)

- 500 g (1.10 lbs)

Environmental

Operating:
- Temperature: 0° C to +40° C (+32° F to +104° F)

- Humidity: 5% to 95% non-condensing

Storage and transportation:
- Temperature: -40° C to +70° C (-40° F to +158° F)

Regulatory

FCC/Industry of Canada
CE Marked
R&TTE Directive 1995/5/EC
Low Voltage Directive 72/23/EEC
EN 300 328
EN 301 489
EN 301 893
UL/IEC/EN 60950
EN 60601-1-1 and EN 60601-1-2
For more country-specific regulatory information and approvals, please see your Aruba representative.

Regulatory Model Number

AP-103 and IAP-103: APIN0103
Certifications

CB Scheme Safety, cTUVus
UL2043 plenum rating
Wi-Fi Alliance (WFA) certified 802.11a/b/g/n

Warranty:

Aruba Limited lifetime warranty
*Aruba’s Hardware Limited Lifetime Warranty is applicable to a subset of Aruba hardware products, detailed at www.arubanetworks.com/assets/faq/FAQ_product_warranty.pdf. “Lifetime” is defined as the period beginning on the Aruba shipment date and ending five years following Aruba’s hardware end-of-sale date. Aruba warrants to its end users that for the Lifetime of the covered hardware product purchased by such end user, the hardware product will substantially conform to Aruba’s published technical documentation as provided by Aruba with the hardware product. Except as otherwise proscribed by applicable law, in the event of a breach of this Hardware Limited Lifetime Warranty, the sole and exclusive remedy, and Aruba’s sole and exclusive liability, will be for Aruba to use commercially reasonable efforts to repair or replace the hardware product that caused the breach of this warranty. If Aruba cannot, or determines that it is not practical to, repair or replace the returned hardware product, then the sole and exclusive remedy and the limit of Aruba’s obligation will be to refund the amount received by Aruba for such hardware product. The Hardware Limited Lifetime Warranty is provided to the original end user only and is not transferrable. For additional information, please refer to the Aruba Product Warranty Frequently Asked Questions (FAQ) document located at: www.arubanetworks.com/assets/faq/FAQ_product_warranty.pdf.

Stránky o produkte:

http://www.arubanetworks.com/products/networking/access-points/103-series/

Technické špecifikácie sa môžu meniť bez predošlého upozornenia. Obsah aktuálneho balenia sa môže líšiť v závislosti od dátumu predaja. Obrázky majú len informatívny charakter.