Aruba IAP-207 (RW) Instant 2x2:2 11ac AP

Popis produktu:

Aruba IAP-207 (RW) Instant 2x2:2 11ac AP

Built-in Bluetooth Low-Energy (BLE) radio
- Enables location-based services with BLE-enabled mobile devices receiving signals from multiple Aruba Beacons at the same time.

- Enables management of a network of Aruba Beacons

Advanced Cellular Coexistence (ACC)
- Minimizes interference from 3G/4G cellular networks, distributed antenna systems and commercial small cell/femtocell equipment.

Quality of Service for Unified Communication apps
- Supports priority handling and policy enforcement for unified communication apps, including Microsoft Skype for Business, with encrypted videoconferencing, voice, chat and desktop sharing.

RF Management
- Adaptive Radio Management (ARM) technology automatically assigns channel and power settings, provides airtime fairness, and ensures that APs stay clear of all sources of RF interference to deliver reliable, high-performance WLANs.

- The Aruba 207 Series APs can be configured to provide part-time or dedicated air monitoring for wireless intrusion protection, VPN tunnels to extend remote locations to corporate resources, and wireless mesh connections where Ethernet drops are not available.

Intelligent app visibility and control
- AppRF technology leverages deep packet inspection to classify and block, prioritize, or limit bandwidth for thousands of applications in a range of categories.

Security
- Integrated wireless intrusion protection offers threat protection and mitigation, and eliminates the need for separate RF sensors and security appliances.

- IP reputation and security services identify, classify, and block malicious files, URLs and IPs, providing comprehensive protection against advanced online threats.

- Integrated Trusted Platform Module (TPM) for secure storage of credentials and keys

Choose your Operating Mode

Aruba 207 Series APs offer a choice of operating modes to meet your unique management and deployment requirements.

Controller-managed mode - When managed by Aruba Mobility Controllers, Aruba 207 Series APs offer centralized configuration, data encryption, policy enforcement and network services, as well as distributed and centralized traffic forwarding.
Aruba Instant mode - In Aruba Instant mode, a single AP automatically distributes the network configuration to other Instant APs in the WLAN. Simply power-up one Instant AP, configure it over the air, and plug in the other APs - the entire process takes about five minutes. If WLAN requirements change, a built-in migration path allows 207 Series instant APs to become part of a WLAN that is managed by a Mobility Controller.
Remote AP (RAP) for branch deployments.
Air monitor (AM) for wireless IDS, rogue detection and containment.
Secure enterprise mesh.
For large installations across multiple sites, the Aruba Activate service significantly reduces deployment time by automating device provisioning, firmware upgrades, and inventory management. With Aruba Activate, Instant APs are factory-shipped to any site and configure themselves when powered up.

207 Series Access Point

AP-207 (controller-managed) and IAP-207 (Instant):
- 802.11ac - 5GHz 2x2 MIMO (867Mbps max rate) and 2.4GHz 2x2 MIMO (400Mbps max rate) radios, with a total of two integrated omni-directional downtilt dual-band antennas

WI-FI Radio Specifications

AP type: Indoor, dual radio, 5GHz 802.11ac 2x2 MIMO and 2.4GHz 802.11n 2x2 MIMO
Software-configurable dual radio supports 5GHz (Radio 0) and 2.4GHz (Radio 1)
5GHz: Two spatial stream Single User (SU) MIMO for up to 867Mbps wireless data rate to individual 2x2 VHT80 client devices
2.4GHz: Two spatial stream Single User (SU) MIMO for up to 400Mbps wireless data rate to individual 2x2 VHT40 client devices (300Mbps for HT40 802.11n client devices)
Support for up to 255 associated client devices per radio, and up to 16 BSSIDs per radio
Supported frequency bands (country-specific restrictions apply):
- 2.400 to 2.4835GHz

- 5.150 to 5.250GHz

- 5.250 to 5.350GHz

- 5.470 to 5.725GHz

- 5.725 to 5.850GHz

Available channels: Dependent on configured regulatory domain
Dynamic frequency selection (DFS) optimizes the use of available RF spectrum
Supported radio technologies:
- 802.11b: Direct-sequence spread-spectrum (DSSS)

- 802.11a/g/n/ac: Orthogonal frequency-division multiplexing (OFDM)

Supported modulation types:
- 802.11b: BPSK, QPSK, CCK

- 802.11a/g/n/ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM

Transmit power: Configurable in increments of 0.5 dBm
Maximum (conducted) transmit power (limited by local regulatory requirements):
- 2.4GHz band: +18 dBm per chain, +21 dBm aggregate (2x2)

- 5GHz band: +18 dBm per chain, +21 dBm aggregate (2x2)

- NOTE: conducted transmit power levels exclude antenna gain. For total (EIRP) transmit power, add antenna gain

Advanced Cellular Coexistence (ACC) minimizes interference from cellular networks
Maximum ratio combining (MRC) for improved receiver performance
Cyclic delay/shift diversity (CDD/CSD) for improved downlink RF performance
Short guard interval for 20MHz, 40MHz and 80MHz channels
Space-time block coding (STBC) for increased range and improved reception
Low-density parity check (LDPC) for high-efficiency error correction and increased throughput
Transmit beam-forming (TxBF) for increased signal reliability and range
Supported data rates (Mbps):
- 802.11b: 1, 2, 5.5, 11

- 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54

- 802.11n: 6.5 to 300 (MCS0 to MCS15)

- 802.11ac: 6.5 to 867 (MCS0 to MCS9, NSS = 1 to 2 for VHT20/40/80

802.11n high-throughput (HT) support: HT 20/40
802.11ac very high throughput (VHT) support: VHT 20/40/80
802.11n/ac packet aggregation: A-MPDU, A-MSDU
WI-FI Antennas

AP-207/IAP-207: Two integrated dual-band downtilt omni-directional antennas for 2x2 MIMO with maximum antenna gain of 3.4dBi in 2.4GHz and 6.6dBi in 5GHz. Built-in antennas are optimized for horizontal ceiling mounted orientation of the AP. The downtilt angle for maximum gain is roughly 30 degrees.
- The maximum gain of the combined (summed) antenna patterns for all elements operating in the same band is 5.2dBi in 2.4GHz and 7.5dBi in 5GHz.

Other Interfaces

One 10/100/1000BASE-T Ethernet network interface (RJ-45)
- Auto-sensing link speed and MDI/MDX

- 802.3az Energy Efficient Ethernet (EEE)

Bluetooth Low Energy (BLE) radio
- Up to 3dBm transmit power (class 2) and -92dBm receive sensitivity

- Integrated antenna with roughly 30 degrees downtilt and peak gain of 2.2dBi

Visual indicators (multi-color LEDs): for System and Radio status
Reset button: factory reset (during device power up)
Serial console interface (proprietary; optional adapter cable available)
Kensington security slot
Power Sources and Consumption

The AP supports direct DC power and Power over Ethernet (POE)
When both power sources are available, DC power takes priority over POE
Power sources are sold separately
Direct DC source: 12Vdc nominal, +/- 5%
- Interface accepts 2.1/5.5-mm center-positive circular plug with 9.5-mm length

Power over Ethernet (POE): 48 Vdc (nominal) 802.3af/802.3at compliant source
- Unrestricted functionality with 802.3af POE

Maximum (worst-case) power consumption: 12.3W (POE) or 10.1W (DC)
Maximum (worst-case) power consumption in idle mode: 5.3W (POE) or 4.4W (DC)
Mounting

The AP ships with two (white) mounting clips to attach to a 9/16-inch or 15/16-inch flat T-bar drop-tile ceiling.
Several optional mount kits are available to attach the AP to a variety of surfaces; see the Ordering Information section below for details
Mechanical

Dimensions/weight (unit, excluding mount accessories):
- 150mm x 150mm x 40mm

- 380g

Dimensions/weight (shipping):
- 190mm x 180mm x 70mm

- 590g

Environmental

Operating:
- Temperature: 0° C to +50° C (+32° F to +122° F)

- Humidity: 5% to 95% non-condensing

Storage and transportation:
- Temperature: -40° C to +70° C (-40° F to +158° F)

Regulatory

FCC/Industry of Canada
CE Marked
R&TTE Directive 1995/5/EC
Low Voltage Directive 72/23/EEC
EN 300 328
EN 301 489
EN 301 893
UL/IEC/EN 60950
EN 60601-1-1 and EN 60601-1-2
For more country-specific regulatory information and approvals, please see your Aruba representative.

Regulatory Model Numbers

AP-207 and IAP-207: APIN0207
Certifications

CB Scheme Safety, cTUVus
UL2043 plenum rating
Wi-Fi Alliance (WFA) certified 802.11a/b/g/n/ac

Aruba Limited lifetime warranty
*Aruba’s Hardware Limited Lifetime Warranty is applicable to a subset of Aruba hardware products, detailed at www.arubanetworks.com/assets/faq/FAQ_product_warranty.pdf. “Lifetime” is defined as the period beginning on the Aruba shipment date and ending five years following Aruba’s hardware end-of-sale date. Aruba warrants to its end users that for the Lifetime of the covered hardware product purchased by such end user, the hardware product will substantially conform to Aruba’s published technical documentation as provided by Aruba with the hardware product. Except as otherwise proscribed by applicable law, in the event of a breach of this Hardware Limited Lifetime Warranty, the sole and exclusive remedy, and Aruba’s sole and exclusive liability, will be for Aruba to use commercially reasonable efforts to repair or replace the hardware product that caused the breach of this warranty. If Aruba cannot, or determines that it is not practical to, repair or replace the returned hardware product, then the sole and exclusive remedy and the limit of Aruba’s obligation will be to refund the amount received by Aruba for such hardware product. The Hardware Limited Lifetime Warranty is provided to the original end user only and is not transferrable. For additional information, please refer to the Aruba Product Warranty Frequently Asked Questions (FAQ) document located at: www.arubanetworks.com/assets/faq/FAQ_product_warranty.pdf.

Stránky o produkte:

https://www.hpe.com/us/en/networking.html

Technické špecifikácie sa môžu meniť bez predošlého upozornenia. Obsah aktuálneho balenia sa môže líšiť v závislosti od dátumu predaja. Obrázky majú len informatívny charakter.