HP MSM760 Premium Mobility Controller Europe

Popis produktu:

2 RJ-45 autosensing 10/100/1000 ports
Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T)
1 RJ-45 serial console port
17.32(w) x 15.38(d) x 1.75(h) in (43.99 x 39.07 x 4.45 cm) (1U height)
13.45 lb (6.1 kg)
Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware included); horizontal surface mounting only
Supported: :
– IEEE 802.11 n/a/b/g access points and/or access devices
– 40 to 200 access points and/or access devices (in increments of 10 or 40)
– MSM firmware releases prior to MSM v5.7: 1,000 simultaneous guest access users upgradable in increments of 250 per 40-AP license pack, up to a maximum of 2,000 guest access users
– MSM v5.7 and later: 2,000 simultaneous guest access users with base product
Included services: :
– Plug-and-play AP management and WLAN management
– Guest access
– Captive portal
– PCI DSS compliance for wireless PoS traffic
– Support for Real-Time Location Services (RTLS)
– Advanced fast roaming with VoWLAN support
– Mobility Traffic Manager (MTM)
– Support for up to 64 VSC profiles
– Unified policy enforcement and network visibility
– Virtual controller (up to five MSM765 zl controllers and 800 APs with resiliency)

Management

Wi-Fi Clear Connect — provides a system-wide approach to delivering WLAN reliability by proactively determining and adjusting to changing RF conditions; optimizes WLAN performance by detecting interference from Wi-Fi and non-Wi-Fi sources using spectrum analysis capabilities built into specific access points (refer to the HP Access Point - Controller compatibility matrix), identifying rogue activity, and making decisions at a system-wide level
Advanced radio resource management —
Automatic radio power adjustments — include real-time power adjustments based on changing environmental conditions and signal coverage adjustment
Automatic radio channel — provides intelligent channel switching and real-time interference detection
Intelligent client load balancing — determines the number of clients across neighboring APs and adjusts client allocation to balance the load
Airtime fairness — helps ensure equal RF transmission time for wireless clients
Spectrum analysis —
Power/frequency spectrum analysis — measures noise from IEEE 802.11 remote sources
Signal detection/classification — identifies source of RF interference, for example, Bluetooth, cordless phones, and microwave ovens
Evaluation of channel quality — helps detect severe channel degradation and improves the reporting of poor RF performance
Remote configuration and management — are available through a secure Web browser, command-line interface (console port or SSH), SOAP, or SNMP
Management interface control — allows interfaces to be enabled or disabled depending on security preferences
Management VLAN — segments traffic to and from management interfaces, including CLI, Web browser interface, and SNMP
RADIUS accounting support — separates RADIUS accounting server support per SSID; provides detailed session, usage, and billing information for each client activity
Logging — provides local and remote logging of events via SNMP (v2c and v3) and syslog; provides log throttling and log filtering to reduce the number of log events generated
Controller networking — includes IEEE 802.1d-compliant bridging and Bridge MIB (RFC 4188), which is supported only on a primary bridge interface; stateful firewall; PPPoE Client (RFC 2516); ICMP (RFC 792); IEEE 802.1q VLAN tagging; NAT (RFC 1631); CIDR (RFC 1519); L2TP and PPTP servers for wireless clients; VPN client, which establishes PPTP or IPSec tunnels to other devices; and IGMP snooping (IGMP proxy v1 and v2), which is supported on the wireless interfaces of APs
DHCP support — includes RFC 2131 and RFC 3046 (DHCP Relay Option-82) for server and built-in DHCP client for client
Band steering — redirects 5 GHz-capable clients automatically to the less-congested 5 GHz spectrum
Controller management — provides secure Web browser (SSL and VPN), command-line interface, SOAP, SNMP v2c and v3, MIB-II with traps, RADIUS Authentication Client MIB (RFC 2618), and RIPv2 MIB Extension (RFC 1724); implements scheduled configuration and firmware upgrades from a central server; offers per-user activity records by time used or data transferred; supports remote syslog
Automated work flows —
Initial controller settings — define basic operational settings for the controller, for example, network connections, security settings, and system time
Wireless network for employees — enables setup of a new wireless network for employees, for example, network and security settings, and basic voice and video settings
Wireless network for guests — provides wireless access for guest users, for example, network and security settings specific to guest access
Support for Bonjour services —
Bonjour gateway — allows discovery of services located in a different layer-3 network.
Bonjour multicast manager — eliminates Bonjour multicast traffic from the WLAN enabling scalable deployment of Apple devices with no performance impact on the Wi-Fi network.
Bonjour access control — enables filters to be applied inbound and outbound (on the AP) to SSIDs, groups of or specific APs. User based filtering can block Bonjour traffic until the user is authenticated.
HP Intelligent Management Center and Wireless Services Manager Software — provide centralized management for discovery, logging, status, and configuration management
Unified network visibility — provides visibility between a wired and wireless network using IEEE 802.1AB Link Layer Discovery Protocol (LLDP) and sFlow
Diagnostics — records association, authentication, and DHCP events in client event log; includes a packet capture tool for Ethernet and IEEE 802.11 interfaces (PCAP format), a wireless client data rate matrix, and a client status page; complete session logging provides detailed information for problem identification and resolution
Back to top
Firewall

Stateful firewall — enforces firewall policies to control traffic and filter access to network services; maintains session information for every connection passing through it, enabling the firewall to control packets based on existing sessions
NAT/PAT — choice of dynamic partial address translation (PAT) or static network address translation (NAT) preserves a network's IP address pool or conceals the private address of network resources, such as Web servers, which are made accessible to users of a guest or public wireless LAN
Authenticated network access — authenticates users with an internal or external RADIUS server or Microsoft® Active Directory before allowing full network connectivity
Back to top
Quality of Service (QoS)

Rate limiting — supports per-wireless client ingress-enforced maximums and per-wireless client, per-queue guaranteed minimums
Centralized traffic — Layer 2 and Layer 3 QoS settings are maintained when using Mobility Traffic Manager or guest access
Back to top
Mobility

HP MSM solutions enhanced for businesses — delivers services for a range of vertical markets, including healthcare, hospitality, education, manufacturing, transportation, and service providers
Powerful security capabilities — robust identity- and role-based user account profiles use internal or external AAA services
Solutions that cover the most important WLAN applications — deliver rich application support, including guest access, location-based services, Voice over Wi-Fi (VoWi-Fi), hotspot, surveillance, and secure point of sale
Capacity that scales from small office to large campus — deploy wireless LANs (WLANs) efficiently with the MSM720 controller, which supports 10 to 40 APs; and the MSM760, MSM765 zl and MSM775 zl controllers, which control 40 to 200 APs
Premium Mobility scalability features —
Virtual Controller — Managed by a single IP address the MSM76x and MS

Stránky o produkte:

http://h17007.www1.hp.com/us/en/networking/products/wireless/HP_MSM_Controller_Series/#J94

Technické špecifikácie sa môžu meniť bez predošlého upozornenia. Obsah aktuálneho balenia sa môže líšiť v závislosti od dátumu predaja. Obrázky majú len informatívny charakter.