Aruba AP-203H (RW) Unified AP

Popis produktu:

Aruba AP-203H (RW) Flex-radio 802.11ac 2x2 Unified Hospitality AP with Internal Antennas

Toto je presne ten Access Point 2x2 MIMO 802.11ac wave1 (prenosová rýchlosť až 867Mbps), ktorý sa hodí pozicionovať ako mostík do riešení HPE Aruba predovšetkým v Hospitality segmente a v SMB.
AP zvládne všetky naše ARUBA unikátne kúzla – vie obmedziť, nastaviť QoS prevádzku cez jednotlivé aplikácie - APP RF, vie nastaviť bezpečnostné politiky v závislosti na reputácii webov, ktoré chce klient zobraziť – virtual FW,
disponuje technológiou CLIENT MATCH pre najefektivnejší management pripojenia klientov v rámci pásma a samozrejmosťou je, že AP sa dodáva v režime kde si vyberiete či chcete INSTANT, CONTROLLERom. alebo RAP (Remote Access Point) – pobočkové z cloudu riadené prostredie.
Unikátne na tomto riešení je že se dá hovoriť v podstate o dvoch zariadeniach v jednom. Štandardný (v krabici dodávaný) form-faktor je ideálny pre inštaláciu na izby v hoteloch, študentských ubytovniach, nemocniciach a podobne.
AP je dodávaný s jednoduchým Wall-Mount-Kitom, vďaka ktorému ho môže klient priskrutkovať, kam si zmyslí.
Keď ale k AP pripojíte nožičky (JY704A) máte krásne riešenie pre nasadenie Wi-Fi v malých a stredných kanceláriách alebo pobočkách.

Product overview

This cost-effective IEEE 802.11ac access point with single or dual radio mode delivers high performance Wi-Fi networks for hospitality and branch offices, while minimizing costs for low to moderate density areas.

The compact Aruba 203H Unified Hospitality Access Point is software configurable to operate in either 1x1 dual radio mode, or 2x2 single radio mode. It supports up to 867Mbps in the 5GHz band or up to 400Mbps in the 2.4 GHz band in single radio 2x2 mode. In dual radio 1x1 mode, the maximum data rates for the 203H AP are up to 433Mbps in the 5GHz band and 200Mbps in the 2.4GHz band.

The 203H AP can be easily mounted to a standard data wall-box using the existing structured cabling system or converted to a desk mounted AP using an optional mounting kit. With its flexible deployment options, the 203H is designed to deliver high-speed Wi-Fi for cost-sensitive, medium-density environments. It ensures the most cost-effective Wi-Fi connectivity for indoor premises including hotel rooms, dormitories, small offices and remote workstations.

Powered by PoE, the 203H AP minimizes power consumption with rich features that further facilitates a highly efficient and reliable wireless network. The 802.11ac 203H AP combines wireless and wired access in a single compact device. The local Gigabit Ethernet port can securely attach wired devices to your network. Additionally, the USB host interface on the AP allows the plug-in of Aruba BLE radio modules to enable advanced location and indoor wayfinding, and proximity-based push notification services.

New 802.11ac flexible radio architecture
- The 203H AP is software configurable to operate in either 1x1 dual radio mode, or 2x2 single radio dual-band mode.

- Supports up to 867Mbps in the 5GHz band (with 2SS/VHT80 clients) or up to 400Mbps in the 2.4 GHz band (with 2SS/VHT40 clients). In 1x1 dual radio mode, these max speeds are up to 433Mbps and 200Mbps respectively.

Optional Bluetooth Low-Energy (BLE) radio module support
- Enables location-based services and other capabilities.

- USB BLE radio module securely attaches to AP

RF Management
- Adaptive Radio Management (ARM) technology automatically assigns channel and power settings, provides airtime fairness and ensures that APs stay clear of all sources of RF interference to deliver reliable, high-performance WLANs

- The 203H can be configured to provide part-time or dedicated air monitoring for wireless intrusion protection, VPN tunnels to extend remote locations to corporate resources, and wireless mesh connections where Ethernet drops are not available.

Security
- Integrated wireless intrusion protection offers threat protection and mitigation, and eliminates the need for separate RF sensors and security appliances.

- IP reputation and security services identify, classify, and block malicious files, URLs and IPs, providing comprehensive protection against advanced online threats.

Intelligent app visibility and control
- AppRF technology leverages deep packet inspection to classify and block, prioritize or limit bandwidth for over 2,500 enterprise apps or groups of apps.

Quality of service for unified communication apps
- Supports priority handling and policy enforcement for unified communication apps, including Microsoft Skype for Business with encrypted videoconferencing, voice, chat and desktop sharing

203H Access Point Specifications

Unified flexible radio 802.11ac 2x2:2SS hospitality and branch AP with internal antennas
Supports wall-box and desk mount deployments
WIFI Radio Specifications

AP type: Indoor, flexible radio:
- 5GHz 802.11ac 2x2 MIMO OR 2.4GHz 802.11n 2x2 MIMO[1], or

- 5GHz 802.11ac 1x1 AND 2.4GHz 802.11n 1x11

Software-configurable radio supports 5GHz (Radio 0) and/or 2.4GHz (Radio 1)
5GHz: Two spatial stream Single User (SU) MIMO for up to 867Mbps wireless data rate to individual 2x2 VHT80 client devices
2.4GHz: Two spatial stream Single User (SU) MIMO for up to 400Mbps wireless data rate to individual 2x2 VHT40 client devices (300Mbps for HT40 802.11n client devices)
Support for up to 32 associated client devices per radio, and up to 8 BSSIDs per radio
Supported frequency bands (country-specific restrictions apply):
- 2.400 to 2.4835GHz

- 5.150 to 5.250GHz

- 5.250 to 5.350GHz

- 5.470 to 5.725GHz

- 5.725 to 5.850GHz

Available channels: Dependent on configured regulatory domain
Dynamic frequency selection (DFS) optimizes the use of available RF spectrum
Supported radio technologies:
- 802.11b: Direct-sequence spread-spectrum (DSSS)
- 802.11a/g/n/ac: Orthogonal frequency-division multiplexing (OFDM)

Supported modulation types:
- 802.11b: BPSK, QPSK, CCK

- 802.11a/g/n/ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM

Transmit power: Configurable in increments of 0.5 dBm
Maximum (conducted) transmit power (limited by local regulatory requirements):
- 2.4GHz band: +18 dBm per chain, +21 dBm aggregate (2x2 mode)

- 5GHz band: +16 dBm per chain, +19 dBm aggregate (2x2 mode)

- NOTE: conducted transmit power levels exclude antenna gain. For total (EIRP) transmit power, add antenna gain

Maximum ratio combining (MRC) for improved receiver performance
Cyclic delay/shift diversity (CDD/CSD) for improved downlink RF performance
Short guard interval for 20MHz, 40MHz and 80MHz channels
Space-time block coding (STBC) for increased range and improved reception
Low-density parity check (LDPC) for high-efficiency error correction and increased throughput
Transmit beam-forming (TxBF) for increased signal reliability and range (2x2 mode)
Supported data rates (Mbps):
- 802.11b: 1, 2, 5.5, 11

- 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54

- 802.11n (2.4GHz): 6.5 to 300 (MCS0 to MCS15)

- 802.11n (5GHz): 6.5 to 450 (MCS0 to MCS23)

- 802.11ac: 6.5 to 867 (MCS0 to MCS9, NSS = 1 to 2 for VHT20/40/80)

802.11n high-throughput (HT) support: HT 20/40
802.11ac very high throughput (VHT) support: VHT 20/40/80
802.11n/ac packet aggregation: A-MPDU, A-MSDU
 

WIFI Antennas

Two integrated dual-band moderately directional antennas for 2x2 MIMO with maximum individual antenna gain of 4.3dBi in 2.4GHz and 6.3dBi in 5GHz. Built-in antennas are optimized for vertical orientation of the AP. The horizontal beamwidth is roughly 180 degrees.
- Combining the patterns of each of the antennas of the MIMO radios (in 2x2 mode), the peak gain of the effective per-antenna pattern is 3.8dBi in 2.4GHz and 4dBi in 5GHz.

Other Interfaces

Uplink: 10/100/1000BASE-T Ethernet (RJ-45, back)
- Auto-sensing link speed and MDI/MDX

- 802.3az Energy Efficient Ethernet (EEE)

- PoE-PD (input): 48 Vdc (nominal) 802.3af/at PoE

Local: 10/100/1000BASE-T Ethernet (RJ-45, bottom)
- Auto-sensing link speed and MDI/MDX

- 802.3az Energy Efficient Ethernet (EEE)

Passive pass-through interface (two RJ-45, back and bottom)
- USB host interface (Type A connector)

- For Aruba LS-BT1USB BLE radio modules only

Visual indicators (LEDs):
- Power/system status

- Radio status

- Local network port status

Reset/LED control button (“paperclip access”)
- Factory reset (when activated during device power up)

- LED control: toggle off/normal

Serial console interface (custom, uUSB physical jack)
 

Encrypted Throughput

Maximum IPsec encrypted wired throughput: 20Mbps
 

Power Sources and Consumption

The AP is powered through Power over Ethernet (PoE)
An optional PoE power injector is sold separately
Power over Ethernet (PoE): 48 Vdc (nominal) 802.3af/802.3at compliant source
Maximum (worst-case) power consumption: 7.2W.
Includes up to 100mW for an attached USB BLE module
Maximum (worst-case) power consumption in idle mode: 3.9W.
 

Mounting

The AP ships with a mounting plate to attach the AP to a single-gang wall-box (most international variations covered). The AP securely attaches to the plate; a custom security tool to remove the AP from the plate ships with the product.
Several optional mount kits are available to attach the AP to a dual-gang wall-box, directly to the wall, or to support desk mounting.
Mechanical

Dimensions/weight (unit,including single-gang wall box mount plate):
- 86mm (W) x 26.5mm (D) x 140mm (H)

- 225g

Dimensions/weight (shipping):
- 115mm (W) x 47mm (D) x 165mm (H)

- 290g

 

Environmental

Operating:
- Temperature: 0° C to +40° C (+32° F to +104° F)

- Humidity: 5% to 93% non-condensing

Storage and transportation:
- Temperature: -40° C to +70° C (-40° F to +158° F)

Aruba Limited lifetime warranty
*Aruba’s Hardware Limited Lifetime Warranty is applicable to a subset of Aruba hardware products, detailed at www.arubanetworks.com/assets/faq/FAQ_product_warranty.pdf. “Lifetime” is defined as the period beginning on the Aruba shipment date and ending five years following Aruba’s hardware end-of-sale date. Aruba warrants to its end users that for the Lifetime of the covered hardware product purchased by such end user, the hardware product will substantially conform to Aruba’s published technical documentation as provided by Aruba with the hardware product. Except as otherwise proscribed by applicable law, in the event of a breach of this Hardware Limited Lifetime Warranty, the sole and exclusive remedy, and Aruba’s sole and exclusive liability, will be for Aruba to use commercially reasonable efforts to repair or replace the hardware product that caused the breach of this warranty. If Aruba cannot, or determines that it is not practical to, repair or replace the returned hardware product, then the sole and exclusive remedy and the limit of Aruba’s obligation will be to refund the amount received by Aruba for such hardware product. The Hardware Limited Lifetime Warranty is provided to the original end user only and is not transferrable. For additional information, please refer to the Aruba Product Warranty Frequently Asked Questions (FAQ) document located at: www.arubanetworks.com/assets/faq/FAQ_product_warranty.pdf.

Stránky o produkte:

http://www.arubanetworks.com/products/networking/access-points/203h/

Technické špecifikácie sa môžu meniť bez predošlého upozornenia. Obsah aktuálneho balenia sa môže líšiť v závislosti od dátumu predaja. Obrázky majú len informatívny charakter.