Aruba AP-303H (RW) Unified AP

Popis produktu:

Aruba IAP-305 (RW) Instant 2x/3x 11ac AP

WI-FI Radio Specifications

AP type: Indoor, dual radio, 5GHz 802.11ac 3x3 MIMO and 2.4GHz 802.11n 2x2 MIMO
Software-configurable dual radio supports 5GHz (Radio 0) and 2.4GHz (Radio 1)
5GHz: Three spatial stream Single User (SU) MIMO for up to 1,300Mbps wireless data rate to individual 3x3 VHT80 client devices
5GHz: Two spatial stream Multi User (MU) MIMO for up to 867Mbps wireless data rate to up to two (1x1 VHT80) MU-MIMO capable client devices simultaneously
2.4GHz: Two spatial stream Single User (SU) MIMO for up to 400Mbps wireless data rate to individual 2x2 VHT40 client devices (300Mbps for HT40 802.11n client devices)
Support for up to 255 associated client devices per radio, and up to 16 BSSIDs per radio
Supported frequency bands (country-specific restrictions apply):
- 2.400 to 2.4835GHz

- 5.150 to 5.250GHz

- 5.250 to 5.350GHz

- 5.470 to 5.725GHz

- 5.725 to 5.850GHz

Available channels: Dependent on configured regulatory domain
Dynamic frequency selection (DFS) optimizes the use of available RF spectrum
Supported radio technologies:
- 802.11b: Direct-sequence spread-spectrum (DSSS)

- 802.11a/g/n/ac: Orthogonal frequency-division multiplexing (OFDM)

Supported modulation types:
- 802.11b: BPSK, QPSK, CCK

- 802.11a/g/n/ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM

Transmit power: Configurable in increments of 0.5 dBm
Maximum (conducted) transmit power (limited by local regulatory requirements):
- 2.4GHz band: +18 dBm per chain, +21 dBm aggregate (2x2)

- 5GHz band: +18 dBm per chain, +23 dBm aggregate (3x3)

- NOTE: conducted transmit power levels exclude antenna gain. For total (EIRP) transmit power, add antenna gain

Unique Benefits

· Dual Radio 802.11ac Access Point with Multi-User MIMO

- Supports up to 1,300Mbps in the 5GHz band (with 3SS/VHT80 clients) and up to 400Mbps in the 2.4GHz band (with 2SS/VHT40 clients).

· Built-in Bluetooth Low-Energy (BLE) radio

- Enables location-based services with BLE-enabled mobile devices receiving signals from multiple Aruba Beacons at the same time.

- Enables management of your deployment of battery-powered Aruba Beacons.

· Advanced Cellular Coexistence (ACC)

- Minimizes interference from 3G/4G cellular networks, distributed antenna systems and commercial small cell/femtocell equipment.

· Quality of service for Unified Communication apps

- Supports priority handling and policy enforcement for unified communication apps, including Microsoft Skype for Business with encrypted videoconferencing, voice, chat and desktop sharing.

· RF Management

- Adaptive Radio Management (ARM) technology automatically assigns channel and power settings, provides airtime fairness, and ensures that APs stay clear of all sources of RF interference to deliver reliable, high-performance WLANs.

- The Aruba 300 Series APs can be configured to provide part-time or dedicated air monitoring for spectrum analysis and wireless intrusion protection, VPN tunnels to extend remote locations to corporate resources, and wireless mesh connections where Ethernet drops are not available.

· Intelligent app visibility and control

- AppRF technology leverages deep packet inspection to classify and block, prioritize or limit bandwidth for over 2,500 enterprise apps or groups of apps.

· Security

- Integrated wireless intrusion protection offers threat protection and mitigation, and eliminates the need for separate RF sensors and security appliances.

- IP reputation and security services identify, classify, and block malicious files, URLs and IPs, providing comprehensive protection against advanced online threats.

- Integrated Trusted Platform Module (TPM) for secure storage of credentials and keys.

· Intelligent Power Monitoring (IPM):

- Enables the AP to continuously monitor and report its actual power consumption and optionally make autonomous decisions to disable certain capabilities.

- For the 300 Series Access Points, the IPM power-save feature applies when the unit is powered by an 802.3af PoE source. By default, the USB interface will be the first feature to turn off if AP power consumption exceeds the available power budget. In rare cases it may be necessary to take additional power saving measures, but in most cases, the 300 Series APs will operate in unrestricted mode.

Aruba Limited lifetime warranty
*Aruba’s Hardware Limited Lifetime Warranty is applicable to a subset of Aruba hardware products, detailed at www.arubanetworks.com/assets/faq/FAQ_product_warranty.pdf. “Lifetime” is defined as the period beginning on the Aruba shipment date and ending five years following Aruba’s hardware end-of-sale date. Aruba warrants to its end users that for the Lifetime of the covered hardware product purchased by such end user, the hardware product will substantially conform to Aruba’s published technical documentation as provided by Aruba with the hardware product. Except as otherwise proscribed by applicable law, in the event of a breach of this Hardware Limited Lifetime Warranty, the sole and exclusive remedy, and Aruba’s sole and exclusive liability, will be for Aruba to use commercially reasonable efforts to repair or replace the hardware product that caused the breach of this warranty. If Aruba cannot, or determines that it is not practical to, repair or replace the returned hardware product, then the sole and exclusive remedy and the limit of Aruba’s obligation will be to refund the amount received by Aruba for such hardware product. The Hardware Limited Lifetime Warranty is provided to the original end user only and is not transferrable. For additional information, please refer to the Aruba Product Warranty Frequently Asked Questions (FAQ) document located at: www.arubanetworks.com/assets/faq/FAQ_product_warranty.pdf.

Technické špecifikácie sa môžu meniť bez predošlého upozornenia. Obsah aktuálneho balenia sa môže líšiť v závislosti od dátumu predaja. Obrázky majú len informatívny charakter.