TrippLite POWERVERTER® Series 230V, 1000W PowerVerter APS INT Inverter/Charger with Pure Sine Wave Output

Popis produktu:

POWERVERTER® Series
APSX1012SW
230V, 1000W PowerVerter APS INT Inverter/Charger with Pure Sine Wave Output

Looking to reproduce wall power from a battery source without any power interference? Are you using a vehicle battery or separate battery bank to supply power in remote locations or work environments where wall power / shore power is not available? With reliable 230V AC power, Pure Sine Wave output and the ability to charge batteries, the Tripp Lite APSX1012SW is your answer.
Clean Pure Sine Wave output
12V DC or 230V AC input; 230V, 50 Hz output (hardwired)
1000 watts continuous output, 2000 watts peak output
Selectable 4/40 amp wet/dry cell battery charger
Quiet, high efficiency operation, high surge capacity and low idle current
Seamless transfer switching

SpecificationsOVERVIEW
Intended Application Emergency Backup Power
OUTPUT
Frequency compatibility 50 Hz
Output watts 1000
Continuous output capacity (watts) 1000
Peak output capacity (watts) 2000
Output nominal voltage 230V
Output voltage regulation Nominal 230v +/- 5% until LBW. Peak coltage 360v
Output frequency regulation 50/60 Hz (+/- 0.5 Hz)
Overload protection Includes 15A input breaker dedicated to the charging system and 15A output breaker for AC output loads
Outlet quantity / type Hardwire
INPUT
Nominal Input Voltage(s) Supported 230V AC
Recommended Electrical Service DC INPUT: Requires 12VDC input source capable of delivering 240A for the required duration (when used at full continuous capacity - DC requirements increase during OverPower and DoubleBoost operation). For automotive applications, professional hardwire installation with 400A minimum battery system fusing is recommended.
Maximum input amps / watts DC INPUT: Full continuous load - 240A at 12VDC. AC INPUT: 17 amps at 230VAC with full inverter and charger load (8.7A max charger-only / combined input load to support charger and AC output is automatically controllable to 66%-33%-0% based on AC output loading using the charger limiting set points - see manual for setting instructions)
Input connection type DC INPUT: Set of 2 DC bolt-down terminals. AC INPUT: Hardwire via built in junction box with cover plate
Voltage compatibility (VAC) 230
Voltage compatibility (VDC) 12
BATTERY
Expandable battery runtime Runtime is expandable with any number of user supplied wet or gel type batteries
DC system voltage (VDC) 12
Battery charge Includes 4/40 amp DC charging system adjustable.
LEDS ALARMS & SWITCHES
Alarms Audible status indicators 10.5V (low battery)/21V start alarm
Switches The inverter provides a RJ-45 port for optional APSRMSW remote control. RJ45 port operates with standard RJ485 interface (APSRMSW sold separately)
Front panel LEDs Set of front panel LED's display inverter status, charger status, as well as battery voltage status
PHYSICAL
Unit Dimensions (HWD/in) 7.25 x 8.75 x 18
Unit Dimensions (HWD/cm) 18.41 x 22.22 x 45.72
Unit weight (lbs) 35.5
Unit weight (kg) 16
Cooling method Fan
Material of construction Powder coated Steel
Receptacle Color Grey
Form factors supported Mounting slots enable permanent placement of inverter on any horizontal surface (see manual for additional mounting information)
ENVIRONMENTAL
Relative Humidity 0-95% non-condensing
SPECIAL FEATURES
Appearance gray color
Remote control capability Yes

Stránky o produkte:

http://www.tripplite.com/en/products/model.cfm?txtModelID=4837

Technické špecifikácie sa môžu meniť bez predošlého upozornenia. Obsah aktuálneho balenia sa môže líšiť v závislosti od dátumu predaja. Obrázky majú len informatívny charakter.