Supermicro superserver SYS-7048R-C1RT4+

Popis produktu:

Key Features

1. Dual socket R3 (LGA 2011) supports
   Intel® Xeon® processor E5-2600
   v4†/ v3 family; QPI up to 9.6GT/s
2. Up to 3TB† ECC 3DS LRDIMM , up to
   DDR4- 2400†MHz ; 24x DIMM slots
3. 2x PCI-E 3.0 x16, 3x PCI-E 3.0 x8, and
   1x PCI-E 2.0 x4 (in x8) slot
4. Quad LAN w/ Intel® X540 10GBase-T
5. I/O ports: 2x SuperDOM, 1x VGA,
   2x COM, 2x USB 3.0, 4x USB 2.0
6. 8x 3.5" Hot-swap SATA3 HDD Bays;
   8x 2.5" Hot-swap SAS3 drives in
   mobile rack; 1x 5.25" drive bay
7. 1000W Redundant Power Supplies
   Titanium Level (96%)
8. Tower or Rackmount



Product SKUs

SYS-7048R-C1RT4+
SuperServer 7048R-C1RT4+ (Black)

Motherboard


Super X10DRC-T4+

Processor/Cache

CPU
Intel® Xeon® processor E5-2600 v4†/ v3 family (up to 145W TDP) *
Dual Socket R3 (LGA 2011)
Cores / Cache
Up to 22 Cores† / Up to 55MB† Cache
System Bus
QPI up to 9.6 GT/s
Note † BIOS version 2.0 or above is required
Note * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization.

System Memory

Memory Capacity
24x 288-pin DDR4 DIMM slots
Up to 3TB† ECC 3DS LRDIMM, 768 ECC RDIMM
Memory Type
2400†/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
DIMM Sizes
RDIMM: 32GB, 16GB, 8GB, 4GB
LRDIMM: 64GB, 32GB
3DS LRDIMM: 128GB
Memory Voltage
1.2 V
Error Detection
Corrects single-bit errors

On-Board Devices

Chipset
Intel® C612 chipset
SATA
SATA3 (6Gbps); RAID 0, 1, 5, 10
SAS
LSI 3108 SAS3 (12Gbps) controller;
HW RAID 0, 1, 5, 6, 10, 50, 60
IPMI
Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
ASPEED AST2400 BMC
Network Controllers
Intel® X540 Quad Port 10GBase-T
Virtual Machine Device Queues reduce I/O overhead
Supports 10GBASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
1x Realtek RTL8201N PHY (dedicated IPMI)
Video
ASPEED AST2400 BMC

Input / Output

SATA
10x SATA3 (6Gbps) ports
SAS
8x SAS3 (12Gbps) ports
SuperCap option support
LAN
4x RJ45 10GBase-T LAN ports
1x RJ45 Dedicated IPMI LAN port
USB
2x USB 3.0 ports (rear)
4x USB 2.0 ports (2 rear, 2 front)
1x USB Type A
Video
1x VGA port
Serial Port / Header
1x COM/Serial
DOM
2x SuperDOM (Disk on Module) ports

Expansion Slots

PCI-Express
2x PCI-E 3.0 x16 (Full-height, Full-length)
3x PCI-E 3.0 x8 (Full-height, Full-length)
1x PCI-E 2.0 x4 (in x8)

System BIOS

BIOS Type
128Mb SPI Flash EEPROM with UEFI BIOS
BIOS Features
Plug and Play (PnP)
APM 1.2
DMI 2.2
ACPI 1.0 / 2.0
USB Keyboard support
SMBIOS 2.3
UEFI


Chassis

Form Factor
4U Rackmountable / Tower
Optional Rackmount Kit
Model
CSE-745TQ-R1K03B

Dimensions and Weight

Height
17.2" (437mm)
Width
7.0" (178mm)
Depth
25.5" (648mm)
Package
24" (H) x 14" (W) x 26.5" (D)
Weight
Net Weight: 57 lbs (25.9 kg)
Gross Weight: 74.5 lbs (33.8 kg)
Available Colors
Black

Front Panel

Buttons
Power On/Off button
System Reset button
LEDs
Power LED
Hard drive activity LED
2x Network activity LEDs
System Overheat LED
Power Fail LED
Ports
2x USB Ports

Drive Bays

Hot-swap
8x 3.5" Hot-swap SATA3 drive trays
8x 2.5" Hot-swap SAS3 drives in mobile rack
Peripheral Bay
1x 5.25" drive bay (optional devices)

SAS / SATA Backplane

• SAS via backplane (BPN-SAS3-I28A) in Mobile rack
• SATA via chassis HDD Backplane CSE-SAS-743TQ-O-P

System Cooling

Fans
3x 8cm Hot-swap redundant PWM Cooling Fans
2x 8cm Hot-swap Rear Exhaust PWM Fans & air shroud

Power Supply (76mm Width)
1000W Redundant Power Supplies with PMBus
Total Output Power
800W/1000W
Dimension
(W x H x L)
76 x 40.4 x 336 mm
Input
100-127Vac / 12-9A / 50-60Hz
200-240Vac / 7.2-6A / 50-60Hz
+12V
 Max: 66.7A & Min. 0A (100-127Vac)
 Max: 83A & Min. 0A (200-240Vac)
5Vsb
Max: 4A / Min: 0A
Output Type
19 Pairs Gold Finger Connector
Certification Titanium Level Certified96%  UL/cUL/CB/BSMI/CE/CCC
 Titanium Level
 [ Test Report ]

PC Health Monitoring

CPU
Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory, Chipset Voltages.
6-Phase-switching voltage regulator
FAN
Total of five fan headers supporting up to 5 fans
5x fans with tachometer status monitoring
Status monitor for speed control
Pulse Width Modulated (PWM) fan connectors
Temperature
Monitoring for CPU and chassis environment
CPU thermal trip support
Thermal Control for 5x fan connectors
Thermal Monitor 2 (TM2) support
PECI
LED
System info. LED:
UID indicator, fan fail/System Overheat
Suspend static indicator LED
UID/Remote LED
Other Features
Chassis intrusion detection
Chassis intrusion header

Operating Environment / Compliance

RoHS
RoHS Compliant
Environmental Spec.
Operating Temperature:
  10°C to 35°C (50°F to 95°F)
Non-operating Temperature:
  -40°C to 70°C (-40°F to 158°F)
Operating Relative Humidity:
  8% to 90% (non-condensing)
Non-operating Relative Humidity:
  5% to 95% (non-condensing)

Stránky o produkte:

http://www.supermicro.com/products/system/4U/7048/SYS-7048R-C1RT4_.cfm

Technické špecifikácie sa môžu meniť bez predošlého upozornenia. Obsah aktuálneho balenia sa môže líšiť v závislosti od dátumu predaja. Obrázky majú len informatívny charakter.