Supermicro Workstation SYS-5038A-I tower SP 2x GigaLAN

Popis produktu:

Key Features

High Performance, Versatile Features & I/O Access
1. Single socket R3 (LGA 2011) supports
   Intel® Xeon® processor E5-2600 v3,
   E5-1600 v3, and 4th gen. Core i7
2. Intel® C612 chipset
3. Up to 512GB ECC DDR4 2133MHz
   LRDIMM or 64GB ECC/non-ECC
   UDIMM (available with Core i7 only);
   8x DIMM slots
4. 4x PCI-E 3.0 x16 slots (runs
   at 16/16/NA/8 or 16/8/8/8),
   2x PCI-E 2.0 x1 (in x4) slots
5. I/O Ports: 2 GbE, ALC 1150 HD Audio,
   6 USB 3.0 + 2 USB 3.0 (front), 1 COM,
   1 TPM, 1 PS/2 Keyboard/Mouse port
6. 4x 3.5" internal drive bays
7. 900W Multi-Output Power Supply



Product SKUs

SuperWorkstation
SYS-5038A-I (Black)

Motherboard


Super X10SRA

Processor

CPU
Intel® Xeon® processor E5-2600/1600 v3 family or Intel® 4th gen. Core™ i7 series (up to 160W TDP **)
Single Socket R3 (LGA 2011)
Core / Cache
Up to 18 Cores / Up to 45MB Cache
Note ** Motherboard supports this maximum TDP. Please verify your system can thermally support

System Memory

Memory Capacity
8x 288-pin DDR4 DIMM slots
Up to 512GB DDR4 ECC LRDIMM
Up to 256GB DDR4 ECC RDIMM
Up to 64GB DDR4 ECC/non-ECC UDIMM (available with Core i7 only)
Memory Type
2133/1866/1600/1333MHz ECC DDR4 SDRAM 72-bit, 288-pin (RDIMM/LRDIMM) / 284-pin gold-plated DIMMs
DIMM Sizes
RDIMM: 32GB, 16GB, 8GB, 4GB
Memory Voltage
1.2 V
Error Detection
Corrects single-bit errors
Detects double-bit errors (using ECC memory)

On-Board Devices

Chipset
Intel® C612 chipset
SATA
SATA3 (6Gbps) via C612 controller
RAID 0, 1, 5, 10 support
Network Controllers
Intel® i210-AT Dual Port Gigabit Ethernet
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
Audio
RealTek ALC1150 High Definition Audio

Input / Output

SATA
10x SATA3 (6Gbps) ports via PCH
LAN
2x RJ45 Gigabit Ethernet LAN ports
USB
8x USB 3.0 ports (2 front + 6 rear)
Audio
7.1 HD Jacks
Keyboard/Mouse
1x PS/2 Keyboard/Mouse port
Serial Port / Header
1x header
TPM
1x TPM 1.2 20-pin Header

Expansion Slots

PCI-Express
4x PCI-E 3.0 x16 slots (runs at 16/16/NA/8 or 16/8/8/8)
2x PCI-E 2.0 x1 (in x4) slots

PCI-E slot #1 supports (x4) and slot #4 (x16) is disabled when an Intel Core i7-5820K is installed

System BIOS

BIOS Type
128Mb SPI Flash EEPROM with AMI® BIOS
BIOS Features
Plug and Play (PnP)
APM 1.2
DMI 2.3
PCI 2.3
ACPI 1.0 / 2.0 / 3.0 / 4.0
USB Keyboard support
Hardware BIOS Virus protection
SMBIOS 2.7.1
UEFI 2.3.1
RTC (Real Time Clock) Wakeup

Management

Software
SuperDoctor® 5
SuperDoctor® III
Watch Dog
Power Configurations
ACPI Power Management
Keyboard Wakeup from Soft-Off
CPU Fan auto-off in sleep mode
Power-on mode for AC power recovery


Chassis

Form Factor
Mid-Tower
Model
CSE-732D3-903B

Dimensions and Weight

Height
16.7" (424mm)
Width
7.6" (193mm)
Depth
20.68" (525.3mm)
Weight
Gross Weight: 35.5 lbs (16.1kg)
Net Weight: 29.5 lbs (13.4 kg)
Available Colors
Black

Front Panel

Buttons
Power On/Off button
LEDs
Power LED
Hard drive activity LED
Network activity LED
System Overheat LED
Ports
2x front USB 3.0 Ports
2x front HD/AC97 Audio Ports

Drive Bays

Internal
4x 3.5" fixed drive bays
Enterprise SATA HDD only recommended
Peripheral
2x 5.25" peripheral drive bays
1x card reader module

System Cooling

Fans
1x 12cm front cooling fan

Power Supply

900W AC multi output power supply
AC Voltage
100-240 V, 50-60 Hz, 10-6 Amp
+5V Standby
3 Amp
+12V1
25 Amp
+12V2
25 Amp
+12V3
25 Amp
+12V4
25 Amp
+5V
25 Amp
+3.3V
25 Amp
-12V
0.5 Amp
Certification Gold Level   Gold Level
Note: • Max. continuous combined load on +3.3V and +5V output shall not exceed 155W.
• Max. continuous combined load on +12V1, +12V2, +12V3 and +12V4 output shall not exceed 860W.

PC Health Monitoring

Voltage
+12V, +3.3V, +5V, 1.05 (PCH), 1.2V (VDIMM), 3.3V standby, Chassis intrusion header, Monitors CPU voltages, VBAT
FAN
Total of 5 fan headers supporting up to 5 fans
5 fan headers with tachometer status monitoring
Status monitor for speed control
Status monitor for on/off control
Low noise fan speed control
Pulse Width Modulated (PWM) fan connectors
Temperature
Monitoring for CPU and chassis environment
CPU thermal trip support
I2C temperature sensing logic
Thermal Monitor 2 (TM2) support
PECI

Operating Environment / Compliance

RoHS
RoHS Compliant
Environmental Spec.
Operating Temperature:
  10°C to 35°C (50°F to 95°F)
Non-operating Temperature:
  -40°C to 70°C (-40°F to 158°F)
Operating Relative Humidity:
  8% to 90% (non-condensing)
Non-operating Relative Humidity:
  5% to 95% (non-condensing)

Stránky o produkte:

http://www.supermicro.com/products/system/tower/5038/SYS-5038A-i.cfm

Technické špecifikácie sa môžu meniť bez predošlého upozornenia. Obsah aktuálneho balenia sa môže líšiť v závislosti od dátumu predaja. Obrázky majú len informatívny charakter.